Should I choose a Leapmotor B10 or C10?

The C10 is the second Leapmotor model which we have seen for a boot hoist design. As with the B10 which we designed last month, the C10 can take our hoist to load up to 100kg.

There isn’t too much in it but the C10 has a slightly larger boot opening compared with the B10 therefore if you are wanting as much space as possible, the C10 is most likely the one to choose.

Just because the C10 is the larger vehicle, it doesn’t mean everything will fit into though so as with all hoist installations, it is vital to check the combination of mobility device and car to make sure your scooter or wheelchair will fit when lifted with the hoist.

If you have a smaller mobility device it may be that the B10 is more than sufficient for your requirements so you can stick with the slightly smaller vehicle.

Some further introductory details in how we begin to assess a mobility device and vehicle can be found on our boot hoist product page.